The Econoliser is the world's first twin knife steriliser that has been designed from the ground up to efficiently sterilise knives that are used in abattoirs, slaughter halls, meat plants and butcheries, but at the same time use the absolute minimum amount of 82°C of water. Each sterilising cycle uses between 60cc's to 180cc's of hot water depending on local regulations which means a massive saving in both water consumption and the treatment of it before it leaves the plant, but more importantly, a huge saving in the cost of the energy to heat the water. Upgrading to the Econolisers could reduce the consumption to as little as 2.5 cubic metres or even less per day. That’s a saving of 96%! Many of the Econolisers competitors leave the knife stewing in a hot soup of waste matter which coats the blade every time it is removed. Every sterilising cycle uses only fresh hot water and all waste is carried to drain by the end of the cycle. Recent swab tests have shown that the knives sterilised in the Econoliser come out much cleaner than from other systems. These tests were conducted by abattoirs themselves. Because they use so little water, steam and therefore condensation on the meat is virtually eliminated. The Econoliser has been designed for ease of maintenance, with all parts being easily replaced. They are made of 304 grade 1.5mm Stainless steel, laser cut to 0.5mm accuracy and then CNC folded and finally jig welded, this ensures interchangeability of parts.